RAB Lighting was one of the highest quality brand in market.
(UL Listing: Suitable for wet locations.)(Voltage: 120 volts AC 60 Hz.)(Power Consumption: 1 watt.)(Time Adjustment: 5 seconds to 12 minutes.) (Scanning LEDs:3 LEDs continually scan back-and-forth.) (Surge Protection:Withstands up to 6000 volts.) (Wide Sensitivity Control:Adjustable from 100% to 30%.) (Temperature Compensation:Sensitivity adjusted automatically for consistent detection in hot and cold ambient temperatures.) (Wall Switch Manual Override:Two flip logic prevents activation by momentary power outages. Override resets to auto at dawn. No extra wiring needed.) (Evening Timer:Keeps lights on for 1-8 hours after dusk. Then sensor is motion activated until dawn.) (Set it and forget it:STL360's full coverage pattern reduces need for aiming and adjustment.) (Advanced Detection Logic:Minimizes false triggers.) (Color Matched Lens:Dark lens with bronze units, white lens with white units.) (Lens Masks:Customized press apply lens mask included to reduce coverage easily) (RF Immunity:Circuits fully shielded for maximum radio frequency immunity.) (Photoelectric Control:Deactivates lights during daylight. Fully adjustable for 24 hour operation or custom applications.) (Detection:Senses 180° and 360° down for Total Detection.) (Switching Capacity:8 amps, 1000 watts incandescent @ 120 volts.) (Patents:RAB sensor and fixture designs are protected under U.S. and International Intellectual Property laws.) (Warranty:10 year sensor warranty.)

- Rank: #79698 in Lighting
- Size: 2 Pack
- Color: White
- Brand: RAB Lighting
- Model: STL360HBW-2
- Dimensions: 9.70" h x6.40" w x13.60" l,4.60 pounds
- Senses 180° out + 360° down for total detection
- Radio frequency immunity
- 6000 volt surge protection
- 1000 watt switching capacity & Pre-wired and pre-assembled on CU4 universal EZ plate
- Protected manual override with auto reset & Can be wired in parallel

Affordable RAB Lighting STL360HBW Super Stealth 360 Sensor with HB101 Bullet Floods (2 Pack)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.